Position: Home » Product Wiki » Ice Machine Installation Method

Ice Machine Installation Method

882 Date: 2020-02-13 Tag: Ice Machine Ice Make Machine
Ice machine placement

Ice machine should be placed in the air circulation, around the safe and clean place.

Ice machine should not be placed in the open air, should not be direct sunlight and rain. Don't get close to the heat source.

The operating environment of the machine should not be lower than 5℃, not higher than 38℃.

There should be enough space around the machine, especially at the back not less than 150mm. So that the machine can dissipate heat.

Please adjust the floor screws at the bottom of the machine to ensure that the machine is placed horizontally.


Ice machine installation of water system


Connect to a source that meets local drinking water standards.

Connect filters when necessary to raise drinking standards.

The water supply system must meet the following conditions:

A. The lowest temperature is 2℃, and the highest temperature is no more than 38℃

B. The lowest water pressure is 0.02mpa and the highest is 0.8mpa


Ice machine power supply installation


The power supply must be consistent with the machine nameplate.

All lines must meet national standards.

The grounding wire must meet the electrical standard.

Voltage fluctuation shall not exceed ±10% of the rated voltage.

Ice Machine Installation Method