How To Use Ice Ball Mold To Make Beautiful Ice Ball

Ice ball-creator, ideal for both bars and home-use Creates spheres of ice which melt slowly, keeping drinks cool. How To Use Ice Ball Mold To Make Beautiful Ice Ball

Ice Ball Mold Usage Instructions:

1. Prepare a bucket or a pot with adequate hot water. Dip the Main Body (Top & Bottom) into the hot water (Suggested product temperature-Skin temperature). The product will work more efficiently with frequent warm up.

2. Place the Placement board in the water tray with the Main Body (Bottom) on the top.
3. Place ice on the Main Body (Bottom) according to the guide lines.
4. Install the Main Body (Top) on the Main Body (Bottom) using the placementrods as a guide

5.The ice will naturally melt with the fall of the Main Body (Top) and melted water will be collected in the water tray.

6. Molding of ice is completed once the Main Bodies (Top & Bottom)connects each other. Remove the Main Body (Top) after a few seconds.
7.Rotate the release lever 90 degrees, then  remove the ice by hand once it lifts up about 5 mm