NOTICE:
This Beer Keg Washer Machine mainly contains the frame, electric system, gas route system and other pipeline system.
1. All procedures are thoroughly controlled by SIEMENS programmable controller. All control parameters (time values) can be adjusted without stopping the machine.
2. Maximum beeline design on main cleaning pipelines makes sure the powerful and thorough scouring.
3. Twin-acting pneumatic angle-seat valve with reliable quality and anti-high temperature characteristic.
4. Adoption of world top products as main accessories makes sure premium quality.
Load the keg → start (cylinder pressing tightly) → gas pumping (draining residue) → scoured by clean water → gas pumping (draining water) → scoured by disinfecting water → gas pumping (circulation of disinfecting water) → scoured by clean water → gas pumping (draining water) → scoured by sterile water → CO2 pumping (sterile water cycled to water tank) → prepare CO2pressure → reset the cylinder → unload the keg
Attention: If you have no sterile water, please replace it by clean water to scour the keg again.
table-board size |
800mm×500mm |
table-board height |
350mm |
exterior dimension |
1100mm×1200mm×1900mm |
net weight |
105Kg |
power |
12KW |
capacity |
30kegs/hour |
filling mode |
keg top side down |
applicable keg |
diameter φ250~φ500, height 360mm~550mm |
gas source pressure |
0.6~0.8Mpa |
CO2 source pressure |
0.4~0.6Mpa |
cylinder valve pressure |
0.4~0.5Mpa |
CO2 valve pressure |
0.15~0.2Mpa |
gas valve pressure |
0.2Mpa |
sterile water pressure |
0.2Mpa |
power voltage |
monophase AC 380V 50Hz |
Your Name
Email or contact@chinacoalintl.com
Tel/Wechat/Whatsapp or +86-17753785400
Country
Enquiry
©Shandong Weixin Import & Export Co., Ltd. © 2016
Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China
Executive Editor: Liu RuiRui / Zhang Wen