Common Faults and Elimination Methods of Oil Press Machine

Common Faults and Elimination Methods of Oil Press Machine

Material moisture is low

Squeeze the press out of the cage gurgling sound, so that the entire press press vibration;
The cake can not be fragmented and scattered and dark brown, and with focal spots;
Power motor load current higher than 30 amps;
The oil position to move out of the direction of the cake, the cake mouth to take smoke, oil reduction, oil dark brown.
Above phenomenon if the duration is too long, will cause major mechanical damage accident. At this time, you must immediately reduce the steam pressure, in the upper steam cylinder to increase the amount of direct steam injection, off the small cut off the door, to reduce the feed to the cage, increase the thickness of the cake, so that the press load gradually decreased, Adjust to return to normal working condition.
The material is high
1, when the material is high moisture will produce the following phenomena: 1. Feed less, or even no feed, or material with the axis of rotation;
2. Pizza loose hair soft, water vapor a lot, the cake with oil, a cake when the cake with the axis of rotation;
3. The motor load drops and the operating current is below 20 amps;
4. The amount of oil to reduce the oil color white, from the foam, the oil position to feed the end of the feed. In the event of the above situation, the indirect steam pressure should be increased immediately and the direct steam injection is reduced. Add some slag cake at the feed port until the oil press returns to normal.